INTELLIGENT SECURITY
DIY HOME SECURITY
MEDICAL HELP
ACCESSORIES
CENTRAL STATION
icon-1.gif (2671 bytes)
top.gif (12732 bytes)
Intelligent Security System

LS-30
A system combining wireless security, home automation and IP technology, ushers in a new era for the smart home or business owner.

 
Features
orange3.gif (380 bytes) Security and home/business automation.
orange3.gif (380 bytes) Computer and Internet interface.
orange3.gif (380 bytes) Calls up to 10 people when activated with up to 5 alert messages, 'Burglar' 'Panic' 'Fire' 'Medical emergency' and a message for temperature hi/low sensor.
orange3.gif (380 bytes) 288 sensors/ zones can be accommodated made up of:
 
32 Controller / Panic Devices, Remote Controllers, Key Pads.
128 Burglary Sensors. Door/window sensors, PIRs (Passive Infrared), Glass Break Detectors
64 Fire Sensors Smoke Detectors, Gas Detectors.
32 Medical Help Transmitters Medical Buttons, Inactivity Detectors.
32 Special Sensors: Flood Detectors, Temperature Sensors, Humidity Sensors.
orange3.gif (380 bytes) System can be simply programmed using HyperSecureLink software and RS-232 adapter in minutes. Connect to a router using an Ethernet adapter and system can be controlled remotely over the internet. (See diagram below)
orange3.gif (380 bytes) Interactive programming with 16 x 2 LCD display. Just answer Yes/No prompts to program.
orange3.gif (380 bytes) Detailed 512 events log with time tag.
orange3.gif (380 bytes) User Password: 10
orange3.gif (380 bytes) 16 programmable X-10 switches. Activate electric appliances or lighting (See diagram below)
orange3.gif (380 bytes) Receiving RF signal strength indication and jamming detection.
orange3.gif (380 bytes) Robust multi-million RF coding and special transmission timing design avoiding interferences.
orange3.gif (380 bytes) Responds to panic, burglary, fire, medical alarm and environmental hazards. Plays recorded messages via phone informing of different alerts .
orange3.gif (380 bytes) Burglar zones with supervised sensors. Base unit will alert low battery or sensor communication problem.
orange3.gif (380 bytes) Door and window open/ close detection.
orange3.gif (380 bytes) Selects partial arming, program each sensor, on off, delay, door chime.
orange3.gif (380 bytes) Built in screamer siren.
orange3.gif (380 bytes) Panic/emergency button .
orange3.gif (380 bytes) Built-in voice dialer stores up to 10 phone numbers, one pager and 2 Central Monitoring Station data links. (Contact ID protocol).
orange3.gif (380 bytes) Hands-free speakerphone, two-way voice communication. listen in and speak to anyone present.
orange3.gif (380 bytes) Dial-in control of listen-in, arm, disarm, event report and automation control.
orange3.gif (380 bytes) Latchkey function to inform parents by phone when kids leave or return home.
orange3.gif (380 bytes) Built in rechargeable backup battery,
orange3.gif (380 bytes) Optional range extender.
orange3.gif (380 bytes) Optional GSM communication module if not using phone line.
orange3.gif (380 bytes) Large range of accessories available. (See below)
 
 
 
The LS-30 system includes a full range of accessories, (see below) so you can customize many features of the system.
All the radio transmitters used in the LS-30 system, except the Remote Controller, have a unique random code that is set by the factory, with 16,777,216 combinations in total.
The Remote Controller uses copy-preventing hopping-code technology, changing its radio code every time you press the button. The combinations possible through this hopping-code are up to 7.3 X 1019.
You may enroll all the wireless accessories and change their related settings, either through the guidance of the interactive LCD display on the Base Unit which is done simply by pressing yes/no button on base unit. Or by using a computer with the proprietary software "HyperSecureLink through an interface adapter, which offers a quicker and simpler way to perform the installation.
Sensors send 'check-in' signal regularly to base unit. When Tamper or Low Battery condition is detected, it reports automatically.
 
 
A 4-button remote for system control. X-10 power switch for home appliance or light control
A wristband device for emergency help. Transmits a signal to the base unit to display on ... Connects to LS-30 base unit and a router which has an internet connection.Access (an ...
Sensor on end of cable triggers sender unit if water is detected where installed ... Detection: LNG (Liquefied Natural Gas) and LPG (Liquefied Petroleum Gas) Alarm Sensei ...
GSM-30 Module

GSM-30 terminal eliminates the need for a land-line. Simply insert a sim card and connect ...
RS-232 Adapter

Connects to PC and base unit with cord supplied. Provides easy way to program the system through HyperSecureLink software.
Wireless Door/Window Contact

Power Source: two AAA alkaline batteries.Current Drain: 5uA @ standby, 20mA @ operat ...
Wireless Glass Break Sensor

Power Source: two AAA alkaline batteriesCurrent Drain: 5uA @ standby, 20mA @ operati
Wireless Internal Siren

Comes with 12V/230V adapter and built in back up batterySimply connect to a power ...
Wireless Keypad

Power Source: four AAA alkaline batteriesCurrent Drain: 4uA @ standby, 36mA @ operat ...
Wireless Pet Immune PIRThis PIR

detector will not activate the alarm system when a pet is less than 60cm high and ...
Wireless PIR Sensor Wireless Range Extender

Extends the range of wireless sensors
Wireless Siren and Strobe Light

Power: 12V DCCurrent: about 25mA @ standby, 135mA @ activationBack-up time: about 30 hours
Wireless Smoke Detector

Alarm Sound Level: 85dB @ 3 mIndicator Light: LED flashes every 45 secondsBattery: 9V
X-10 Controller Module

Connect to a power point near the base unit and with cable ¡K
 
 

logo-ani.gif (57751 bytes)
Scientech Electronics Co., Ltd.

Copyright 2003 Scientech Electronics Co., Ltd. Website Published By Taiwan Products Online , China Sources Online