Smoke
Detector
Photoelectric Smoke Detector adopts a photo emitter and a photo sensor in a sensing
chamber, which is designed to block ambient light, but smoke can flow through it easily.
Normally the photo sensor detects very little light from the photo emitter, but smoke
causes the light inside the chamber to scatter, which results in more light to be detected
by the photo sensor, and trigger an alarm.
Features |
 Photo-electric type,
no radioactive material .
9V battery powered, easy to install.
Low profile design.
Superior immunity to false alarms caused by dust
or insects.
Easy to verify by checking the LED indication.
Built-in alarm buzzer and radio transmitter.
Low battery beep warning.
Low power : 3m A@standby, 10mA@ operation.
SM-2
for LS-900IA
SSD-02,
for LS-9001 & LS-9001N |
|
Gas
Leakage Detector
LNG (Liquefied Natural Gas) and LPG (Liquefied Petroleum Gas) are commonly used in daily
life for many families. Both are colorless and flammable. An explosion would be caused by
a spark or a flame if they severely leak. To detect the leakage of natural gas, the
detector should be placed at higher position near the ceiling, because natural gas is
lighter than air. And for LPG, a proper location for detection is about 30cm above the
floor, since it's heavier than air.
Features |
Detects LNG and LPG.
Built-in alarm buzzer and radio transmitter.
120V or 230V AC power.
GD-1
for LS-9001A
SAD-02
for LS-9001 & LS-9001N |
|
1-Button Pendant
Transmitter
Triggers auto dialer remotely to call for help.
With neck chain.
Answers incoming call remotely ( only on LS-9001A).
Designed for the handicapped and old people.
PT-1 for LS-9001A
PT-1W
Waterproof, wristband type for LS-9001A
SRC-02 for LS-9001 &
LS-900IN |
  |
|
2-Button Remote Control
Arms & Disarms system remotely.
Triggers emergency siren.
SRA-02 : for LS-9001
& LS-9001N |
 |
4-Button Remote Control
Away, Disarm, Home and Panic buttons.
Control a system remotely.
RC-1 for LS-9001A |
 |
Wireless Keypad
Controls LS-9001A remotely.
9V battery powered, with low battery
self-detection.
Very
low power consumption.
Backlit
feature for operating in the dark.
User
programmable pass code.
Lock
up automatically when unauthorized access continuously.
Built-in
tamper switch.
KP-1
for LS-9001A |
 |
|
Door/window Sensor
Used to secure door and window.
Low battery detection.
Regular report with door open/close detection
( only on LS-9001A)
DS-1 for LS-9001A
SWS-01 for LS-9001
& LS-9001N |
|
Glass Break Sensor
Sends alarm signal when window shock.
No false alarm from impact or high wind.
Low battery detection.
Regularly
reports to the system ( only on LS-9001A).
GB-1 for LS-9001A
SGD-02 for LS-9001 &
LS-9001N |
|
PIR Motion Detector
Uses infrared technology to detect intruders.
Activates the system when monitored area is
entered.
Pulse counts selectable.
Very low power and high reliability.
Low battery detection.
Regularly reports to the
system (only on LS-9001A)
PIR-1 for LS-9001A
SPIR-01B for LS-9001 & LS-9001N |
|
Wireless Siren
Prevents intruder from locating and destroying base
unit because of full separation.
High decibel and ear piercing alarm, and easy to
install.
Built-in rechargeable battery
Two or more wireless siren can be used to enhance
threatening effect.
WS-1B for LS-900IA
WS-20B siren
& light for LS-9001A
SRS-01B for LS-9001 |
|
Siren with light
Wired to base unit.
Alerts occupants and neighbors.
LD-96
LD-282
LD-283 built-in
rechargeable battery
|
 |
| LD-96 |
LD-282/283
WS-20B |
|
External back-up power
Provides power to base unit during AC power
failure.
12V/1.2AH rechargeable battery inside.
Auto charger and over-discharge protection.
SUPS-01 |
 |
